Caraustar offers the best in protective packaging. Our products stand above the competition.

Protect-a-Board

Our edge protectors are made from recycled paperboard that protects and stabilizes palletized goods during transit. Protect-A-Board's rugged, 90-degree angle construction maintains product integrity while creating stability and stackability.

• Protects the edges of palletized freight from strapping, stretch film, dents, abrasions and other damage associated with shipping and handling.
• Protects lumber and other building materials; furniture and appliances; stainless steel and other metal goods; produce and other fragile items.
• Outer surfaces can be printed with your logo, advertisements or handling instructions.
• Available as kraft colored or white top ply with up to six colors.

Protect-A-Coil ID/OD

Protect-A-Coil ID/OD is designed to protect inside and outside diameters of metal coils, rolls of fine paper and other irregularly palletized freight. Notches can be spaced to handle different roll and coil circumferences.

Protect-A-Coil CR

 

Now Protect-A-Coil is available in a continuous roll.

• Caliper range:

                       .040”
                       .050”
                       .060”

• Three profiles available
• 2” fingers rounded tips (2” – 5” base)
• 2” fingers flat tips (2” base)
• 5” fingers pointed tips (2” – 4” base)

End Uses:

• Finished steel coils
• Pre-Printed paper rolls
• Non-woven textiles
• Film
• Furniture

Protect-a-Wrap

Protect-A-Wrap is formed at a 90-degree angle, then reinforced by wrapping the top ply of paper for added strength and a cleaner appearance. Protect-A-Wrap provides:

Improved stacking ability due to enhanced column strength
Overwrap that provides a cleaner product with less dust
Smooth edges that enhance product appearance and safety consciousness
Cost reduction through better yields
Outer surfaces that can be printed with your logo, advertisements or handling instructions
Enhanced moisture protection
Worldwide export capabilities
Kraft colored or white top ply options with up to six colors.

Protect-a-Flex

Protect-A-Flex offers the benefits of our popular Protect-A-Board but with mitered corners that reduce packaging labor and allow 90-degree turns that form a protective frame for your product.

Protect-A-Strap

Our strap protectors are available in standard and machine grade.

Standard grade is the most common choice for strap protection:

Often used to protect roll and sheet metal goods
Applied to a variety of products manually and secured with manual or semi-automatic strapping tools/machines
Machine grade features include:

Provide superior protection from strap damage for products in the dimensional lumber and plywood industries
Manufactured to your exact specifications using our quality Protect-A-Board and Protect-A-Wrap products
Primarily secured using steel strapping
Applied using fully automatic machines
Available as kraft colored or white top ply with up to six colors.

Protect-A-Board SR with Snap-Right

Caraustar’s Protect-A-Board SR reduces pallet packaging and unpacking times. In seconds, you can remove perforated portions of Protect-A-Board SR to create the ideal height-edge protection.

Convenient and safe for partially unpacked shipments and perfect for irregular sized loads
Turn your scrap into strap protection
Outer surfaces can be printed with your logo, advertisements or handling instructions in up to six colors
Manufactured with up to 60% post consumer material
Available in multiple segment lengths and leg sizes (1.5 x 1.5, 2 x 2, 3 x 3, 4 x 4)

 

Caraustar Fiberwrap®

The ideal industrial packaging product – exclusively from Caraustar®.

Caraustar® Fiberwrap® is the ideal industrial packaging product because of its strength, thickness, width/length range and overall performance. It forms a true 90 degree angle for tighter fit and edge protection.

Capabilities

Stores flat
Simple Setup
Excellent beam strength
Superior impact & puncture protection
Consistently sized every time
250%–300% greater beam strength than traditional corrugated packaging
Forms a true 90° angle for tighter fit and edge protection
Additional information

Fiberwrap® is completely EXEMPT from any import or export packaging rules and specifications under IPPC–ISPM # 15.
Certain capabilities may vary depending on manufacturing location. Check with your Sales Representative for specific capabilities.

Protect-A-Sleeve

Our Kraft paper sleeves are available in rolls or pre-cut to specified lengths, as well as in various paper grades and weights. Protect-A-Sleeve is designed for the outer protection of rolled and/or tubular goods to prevent marring and scratching of round products during transit.

Protect-A-Floor
Temporary surface protection for floors and other surfaces
For more information:
888-462-9377
constructionproducts@caraustar.com

Protect-A-Floor

Newedge Guards Sell SheetTemporary surface protection for floors and other surfaces Sell Sheet
Strength and durability where you need it most

Temporary surface protection guards against water, paint, mud and more

Protects all types of surfaces: wood, tile, concrete, colored concrete, marble, terrazzo and stone, saving costly damage repairs
Fluid Resistant Technology – will not be damaged by spills
Made with 100% recycled paperboard
Available in 38” x 100’ rolls
.046 thickness
Protect-A-Floor protection rolls are individually packaged for maximum protection from the elements throughout the job site lifecycle
Size customization available
Made in the USA
The only supplier of paperboard temporary surface protection that controls the total manufacturing process of the product
Private Label Printing Available