Mecmesin webinar: Fundamentals of compression testing

18 Aug 2021
Mecmesin

When: Tuesday 14 September, 2021
Time: 1:00pm - 2:00pm Eastern
Cost: Free to Attend - Reservation Required
Where: Virtual - GoToWebinar

Push or compressive testing helps determine the limits of most products that require constant pushing or compression. Compression testing is critical in the manufacturing process, as well as determining how products and components function in their day to day operations.

This is a foundational level webinar and will focus on the importance of push or compression testing in everyday life and the methods used by manufacturers to ensure safety and quality.

What You’ll Learn:

The importance of Compression (push) testing
How compression testing enhances product quality
What happens when samples fail
The different Types of compression testing
Industries where compression testing is critical
Best methods of compression Testing (Manual, Motorized or Automated)

Who should attend:
Manufacturing, Production and Quality Managers and Engineers involved in:

Plastics and Blow-molding
Pharmaceutical and Medical Device
Beverage and Bottling
Electrical and Mechanical Assembly
Packaging
Automotive

Mecmesin Expands OmniTest UTM Range

Mecmesin, a renowned global leader in the design and manufacturing of force, materials, and torque testing equipment for quality control, proudly announces the expansion of their OmniTest universal testing machine (UTM) range. The latest additions to the OmniTest lineup include three new single-column models with capacities of 0.5 kN, 1 kN, and 2.5 kN.

ASTM D3330 Test Method A 180 degree Peel test on Single Tape

Watch a MultiTest-i force testing stand and Emperor software performing a 180-degree peel test based on ASTM D3330 - the standard test method for peel adhesion for pressure-sensitive tape.

135° Peel Test with Custom Designed Vacuum Fixture

Peel testing is used to assess bond quality and is a simple way of determining the adhesion strength of a material, especially in the case of a thin film deposited on a substrate. Ensuring the packaging container does not deform when the seal is peeled open is essential for accurate, repeatable results.

What is a flat crush test (FCT)?

Mecmesin's flat crush resistance test serves to define corrugated cardboard/fiberboard's resistance to compressive loads. The level of the flat crush resistance depends on the flute material and the type of the flute.

Have your tests yielded invalid results?

There is a lot to consider when physically testing a packaging material or component. Not only is it key to be able to apply load to your test specimen(s), but also set up everything in order to generate valid results. So, how can you ensure that your tests won't fail?

Essentials of GRIP & FIXTURE Selection in Force & Torque Testing

When physically testing a packaging material or component, the ability to apply load to a test specimen is important—but having the ability to apply that load correctly is just as crucial. Join Mecmesin's Free Online Webinar on April 19th to understand which grip or fixture to use is critical for accurate measurements.

Mecmesin webinar: Cap Closure and Removal Torque Testing - Now on demand!

Packaging and manufacturing engineers can benefit from Mecmesin's latest webinar regarding cap closure and removal torque testing, now available to view on demand.

Grips & Fixtures used on Force & Torque Testers

When physically testing a material or component, the ability to apply load to a test specimen is important—but having the ability to apply that load correctly is just as crucial. This cost-free Mecmesin webinar will focus on the importance that grip and fixture selection have on your test results.

Essentials of Consumer Packaging Testing

If you want to maximize your cost saving by minimizing excess material and over design, while keeping your products protected in transit, then this free webinar is for you.

Mecmesin solutions for testing in cosmetics and personal care

By using a Mecmesin system you can benefit from its universal functionality to test both the texture characteristics of the cosmetic and the performance of the applicator.

Force and torque testing methods used to assess the quality and performance of syringes

Vaccines are administered in several ways: orally; by subcutaneous (SC), intramuscular (IM) and intradermal (ID) injections and via the intranasal (IN) route. Each of these routes requires the vaccine to be carefully controlled and administered via a medical device. All medical devices must be tested to ensure they are safe and meet stringent test standards and regulations.

Mecmesin webinar: T-Peel (adhesion strength) testing

This webinar will focus on the most common approach to measuring the adhesion strength of two materials bonded together with an adherent. Commonly known as the T-Peel Test, this type of testing can be found in industries like packaging, automotive, leather and upholstery, food, and beverage and many more.

Mecmesin webinar: Introduction to consumer packaging testing

Damaged packaging can not only cost money but also impact brand perception. In this webinar, we’ll discuss the benefits of testing, when to test and what can be tested. We’ll then look to real-world packaging applications.

Testing of chemicals and adhesives

Chemicals, adhesives and coatings play a crucial role in almost every area of our lives, so testing their performance is vital. If they are designed to peel, they should do so consistently and predictably. If they are designed not to fail, then their behaviour before and at failure, in adhesion and cohesion, also matter.

Testing gels and hydrocolloids

Gels and hydrocolloids such as agar, gelatin, xanthan and guar gum, etc. are widely used in the food, cosmetics/personal care, and medical/pharmaceutical industries. Mecmesin force and torque testing systems are used to precisely quantify textural characteristics such as gel strength, elasticity and rupture force, which are all key to controlling the function and quality of these ingredients.

Mecmesin webinar: Tensile testing: Basics, tips and trends

Join us on Wednesday 14th October for our free webinar “Tensile Testing: Basics, Tips and Trends”. Aimed at a foundation knowledge level, we will be looking at the importance of pull or tensile testing in everyday life and the methods and solutions used by manufacturers to ensure safety and quality.

Mecmesin launches new texture analysis website

Mecmesin has launched its new texture analysis website enabling the simulation of any interaction with food, cosmetics or pharmaceutical products in order to measure the physical sensory experience.

White paper: Why test top-load?

Packaging for consumable goods must provide product protection. Mecmesin's white paper 'why test top load' identifies the business advantages of top-load testing for the packaging industry.

Mecmesin OmniTest machine demo by the Duchess of Sussex at University of Chichester Tech Park opening

The Duke and Duchess of Sussex officially opened the University of Chichester’s new Engineering and Digital Technology Park on 3rd October 2018. Part of the tour of the £35million development, based at the Bognor Regis campus, was a visit to the Department of Engineering and Design. The laboratory features several Mecmesin force measurement machines, notably a 50 kN OmniTest Universal Testing Machine (UTM); a state-of-the-art software-controlled materials testing system.

Mecmesin Ltd, global leader in force and torque test and measurement, acquired by Battery Ventures

Mecmesin, a 41 year old British company specialising in the design and manufacture of force and torque testing equipment for quality control, has been acquired by PPT Holdings, a Battery Ventures company. Battery Ventures is a global investment firm focused on technology and innovation worldwide that has raised $6.9 billion since inception.

Mecmesin sponsors Millais School through the Learning Partnership

Mecmesin is sponsoring Millais School in Horsham, for the Race For The Line challenge run through The Learning Partnership. The initiative is intended to inspire tomorrow's engineers and scientists with a national competition involving around 70,000 students.

Siemens includes Mecmesin design for the new SE 2019 release

Mecmesin’s ABC-t Automated Bottle Closure Tester featured as the lead case study in the launch of Siemens Solid Edge 2019 3D CAD software at the PLM Connections event in Phoenix, Arizona. Tools available with SE out of the box are able to perform the Finite Element Analysis and volumetric calculations necessary to avoid having to manufacture expensive prototype parts.

Testing food packaging - quality assurance questions and answers

The packaging of food presents a unique challenge in the sector due to the conflicting objective requirements of functionality and legislation and the subjective, emotional and sensory judgement of aesthetics, ease of use and ultimately the product contained.

Testing beauty product packaging – ensuring functionality and form

Beauty may be more than skin deep, however brand reputation and loyalty in this market can very much depend on the outer packaging - failure to open, inform, dispense or re-seal with the expected qualities, may discourage the customer from experiencing the product within. For such a design-led industry, guaranteeing optimum functionality and form requires quantifiable test methods to measure these attributes.

Methods of force and torque testing for food packaging quality

Packaging solutions for food are incredibly diverse; in all aspects of physical design, mechanical function and aesthetic appeal. Their purpose is more straightforward: be safe, secure, yet easy to open, close or reliably re-seal; dispense cleanly and efficiently; minimise loss and waste; maximise shelf life; be cost-effective to manufacture and ultimately recycle or dispose of. Add to that, the consumer desire for attractive and innovative new designs, and the straightforward ultimate purpose can become quite involved in terms of meeting each individual challenge.

Mecmesin white paper: Force testing in medical tubing

Plastic medical tubing is central to the provision of effective health care in the 21st century. It is essential for the delivery of blood, nutrients and gases to the patient, and for the execution of minimally invasive surgical procedures such as cardiac angioplasty, which have proliferated widely over recent years. This article examines four force testing procedures for plastic medical tubing and explores the benefits and methodological considerations of each.

Mecmesin celebrates 40 years of testing packaging to perfection

The importance of visually-appealing packaging is obvious, but just as important are the quality, functionality and integrity of the utilised materials for consumer confidence and brand reputation. We caught up with Declan Tierney, Sales Director at Mecmesin, to learn about the key role their equipment plays in ensuring your packaging stands up to the test.

Digital manually operated torque testers

Mecmesin’s range of manually-operated digital torque testers provide a simple and cost effective method of measuring low-level torque.

Motor-driven torque testing systems

Mecmesin can offer torque test stands to suit any requirement, from higher-torque PC-controlled systems, to touch-screen testers suited to production areas, high-precision torque testers, and more basic motorised stands for flexible use with a digital gauge and torque sensor.

Universal testing machine range (0.5 - 5 kN)

Mecmesin offers a wide range of universal testing machines (UTM) for tension and compression testing. At the top end, our MultiTest-i systems are driven by the powerful Emperor™ control and analysis software on a separate PC, while our production-level testers in the MultiTest-xt series offer touch-screen ease of use and rapid processing. All of these systems give fully programmed control and accurate, repeatable testing, with test libraries for instant recall.

Universal testing machine range (10 - 50 kN)

Mecmesin offers a wide range of universal testing machines (UTM) for tension and compression testing, including high loading for larger containers and packaging. At the top end, our MultiTest-i systems are driven by the powerful Emperor™ control and analysis software on a separate PC, while our production-level testers in the MultiTest-xt series offer touch-screen ease of use and rapid processing.

Mecmesin announces ‘Helixa’ precision torque tester

New from Mecmesin, the Helixa precision torque tester has been designed for achieving precise alignment when using the most sensitive torque sensors. It is a significant development in the torque testing of medical devices. Designers and engineers of the smallest rotary controls, the lightest springs, the finest bearings, and the most precise rotating connectors are already adopting the Helixa for its leading-edge features.

Jo Webb
Company News
English
Created 18 Aug 2021
Modified 18 Aug 2021
Hits 1013

Public

If this is your company, CONTACT US to activate Packbase™ software to build your portal.

Mecmesin webinar: Fundamentals of compression testing

See also

Mecmesin Expands OmniTest UTM Range

ASTM D3330 Test Method A 180 degree Peel test on Single Tape

135° Peel Test with Custom Designed Vacuum Fixture

What is a flat crush test (FCT)?

Have your tests yielded invalid results?

Essentials of GRIP & FIXTURE Selection in Force & Torque Testing

Mecmesin webinar: Cap Closure and Removal Torque Testing - Now on demand!

Grips & Fixtures used on Force & Torque Testers

Essentials of Consumer Packaging Testing

Mecmesin solutions for testing in cosmetics and personal care

Force and torque testing methods used to assess the quality and performance of syringes

Mecmesin webinar: T-Peel (adhesion strength) testing

Mecmesin webinar: Introduction to consumer packaging testing

Testing of chemicals and adhesives

Testing gels and hydrocolloids

Mecmesin webinar: Tensile testing: Basics, tips and trends

Mecmesin launches new texture analysis website

White paper: Why test top-load?

Mecmesin OmniTest machine demo by the Duchess of Sussex at University of Chichester Tech Park opening

Mecmesin Ltd, global leader in force and torque test and measurement, acquired by Battery Ventures

Mecmesin sponsors Millais School through the Learning Partnership

Siemens includes Mecmesin design for the new SE 2019 release

Testing food packaging - quality assurance questions and answers

Testing beauty product packaging – ensuring functionality and form

Methods of force and torque testing for food packaging quality

Mecmesin white paper: Force testing in medical tubing

Mecmesin celebrates 40 years of testing packaging to perfection

Digital manually operated torque testers

Motor-driven torque testing systems

Universal testing machine range (0.5 - 5 kN)

Universal testing machine range (10 - 50 kN)

Mecmesin announces ‘Helixa’ precision torque tester

Defining product shock fragility

Mecmesin

Defining the transport environment

Mecmesin

Have your tests yielded invalid results?

Mecmesin

Ring Crush Test (RCT) of paperboard

Mecmesin

Mecmesin webinar: Cap Closure and Removal Torque Test...

Mecmesin

Grips & Fixtures used on Force & Torque Testers

Mecmesin

Top-load testing of plant-based PLA material bottles

Mecmesin

Essentials of Consumer Packaging Testing

Mecmesin

Mecmesin webinar: Fundamentals of compression testing

Mecmesin

Force and torque testing methods used to assess the qu...

Mecmesin

Custom development system of an automated break loose ...

Mecmesin

Edge Crush Test (ECT) of corrugated cardboard

Mecmesin